Featured Product
Banner American
EasyLam 27
The Banner American EasyLam 27 is similar to the 24" wide Varitronics ProFinish cold laminator, except that it uses hot lamination. The 27" EasyLam laminator uses 1.5 - 3.0 mil. film and gives you 2 extra inches in width over the ProFinish.
Business Solutions
IDENTIFY
Areas of your facility where visual information can be improved for an
immediate impact on safety, productivity and compliance By taking
advantage of our Facility Identification Evaluation Guide
Site Search
Laminating Problems and Solutions
Ledco Laminating FAQs
Squealing while film is advancing
This is usually caused by too much heat, forgetting to turn on the fans, or forgetting to close and lock the pull rollers (this last item applies only to HD and Digital machines). The adhesive in the film needs to cool and solidify while it is pulled flat and tight between the laminating and pull rollers. If there is too much heat, or if the fans are off, or if the pull rollers are open, the adhesive will set up while the film is slack or curved, resulting in a clear but wavy laminated surface. Lines of distinct dimples which run down the senter of the web at right angles to the laminating rollers are caused by excessive heat and/or forgetting to turn on the fans.
| More Laminator Information |
|